Hex-Head Ball Plungers

Hex-Head Ball Plungers are compact spring loaded devices for indexing, locating and positioning in applications with side loading requirements. The hex-head with screwdriver slot provides two installation options and a defined, fixed installation position to maintain controlled end forces. Available in steel or stainless steel in four ANSI thread sizes 1/4-20 through 5/8-11 with three standard spring forces and with or without thread lock. Not available in metric.

Specify by

  • Material (steel or stainless steel)
  • Thread size (ANSI 1/4-20 through 5/8-11)
  • Spring force (three standard options)
  • Thread lock requirement (with or without)

Click any row to see CAD and additional product information, or to add to quote.

Open All Tables
ANSI (Inch/American) Tables
CAD Drawing

Click any part number to see CAD, more information on part, and add to quote.

Contact Engineering
Part No.End Force, (Lbs.)ABCDEFROHSCAD
Non-locking		CAD
With Thread Lock
Non-lockingWith Thread LockInitialFinal
HSSB54HSSB54P3.07.01/4-200.720.0350.1253/80.19HSSB54HSSB54P
HSSBL54HSSBL54P2.04.01/4-200.720.0350.1253/80.19HSSBL54HSSBL54P
HSSBH54HSSBH54P4.012.01/4-200.720.0350.1253/80.19HSSBH54HSSBH54P
HSSB58HSSB58P5.010.03/8-160.880.0480.1881/20.25HSSB58HSSB58P
HSSBL58HSSBL58P2.55.03/8-160.880.0480.1881/20.25HSSBL58HSSBL58P
HSSBH58HSSBH58P6.021.03/8-160.880.0480.1881/20.25HSSBH58HSSBH58P
HSSB60HSSB60P6.012.01/2-131.000.0720.2815/80.28HSSB60HSSB60P
HSSBL60HSSBL60P3.06.01/2-131.000.0720.2815/80.28HSSBL60HSSBL60P
HSSBH60HSSBH60P6.030.01/2-131.000.0720.2815/80.28HSSBH60HSSBH60P
HSSB62HSSB62P9.018.05/8-111.250.0960.3753/40.31HSSB62HSSB62P
HSSBL62HSSBL62P4.59.05/8-111.250.0960.3753/40.31HSSBL62HSSBL62P
HSSBH62HSSBH62P7.050.05/8-111.250.0960.3753/40.31HSSBH62HSSBH62P

Conversion Calculators

Enter known value in place of X to view results.

Metric & Inch conversion:
Inch
=
mm
Lbf/Newton Conversion:
lbf
=
N
Translate