View All Phenolic Nose Standard Spring Plungers
Standard Spring Plungers – Phenolic Nose are threaded spring loaded devices used for positioning, indexing, detents, latching, contacts and ejecting on aluminum, brass and other soft, easily marred materials. The phenolic nose provides high tensile strength and high dielectric strength with a reinforced, wear-resistant, self-lubricating contact surface. Available in ANSI thread sizes 8-32 through 5/8-11 with standard or light end forces and optional thread lock. Not available in metric.
Specify by:
- Thread size (ANSI)
- Required travel
- End force requirement (standard or light)
- Thread lock requirement
Click any row to see CAD and additional product information, or to add to quote.
| Part No. | End Force, (Lbs.) | A | B | C | D | ROHS | CAD | CAD With Thread Lock |
|||
| With Thread Lock | Initial | Mid. | Final | ||||||||
| NS50 | NS50P | 2.7 | 5.0 | 7.3 | 8-32 | 0.63 | 0.094 | 0.070 | NS50 | NS50P | |
| NS52 | NS52P | 2.9 | 7.0 | 11.1 | 10-32 | 0.75 | 0.125 | 0.920 | NS52 | NS52P | |
| NS54 | NS54N | 3.0 | 8.0 | 13.0 | 1/4-20 | 1.00 | 0.188 | 0.118 | NS54 | NS54N | |
| NS54A | NS54AN | 3.0 | 8.0 | 13.0 | 1/4-28 | 1.00 | 0.188 | 0.118 | NS54A | NS54AN | |
| NS56 | NS56N | 3.0 | 9.0 | 15.0 | 5/16-18 | 1.00 | 0.188 | 0.135 | NS56 | NS56N | |
| NS58 | NS58N | 5.5 | 10.0 | 14.5 | 3/8-16 | 1.13 | 0.188 | 0.187 | NS58 | NS58N | |
| NS60 | NS60N | 6.6 | 12.0 | 17.4 | 1/2-13 | 1.25 | 0.250 | 0.248 | NS60 | NS60N | |
| NS62 | NS62N | 10.5 | 18.0 | 25.5 | 5/8-11 | 1.50 | 0.313 | 0.310 | NS62 | NS62N | |
Conversion Calculators
Enter known value in place of X to view results.
Metric & Inch conversion:
Inch
=
mm
Lbf/Newton Conversion:
lbf
=
N
Translate